Skip to content
Fencer Intel
medium 5.5

CVE-2026-43363 json

x86/apic: Disable x2apic on resume if the kernel expects so

published 6mo ago modified 3d ago also EUVD-2026-28669

cvss
5.5
version 3.1, NVD
cisa kev
Not listed
not in CISA's catalog
epss
0.1%
EPSS 0.1% chance of exploitation in 30 days, percentile 2%
public exploits
0
none known

Summary

In the Linux kernel, the following vulnerability has been resolved:

x86/apic: Disable x2apic on resume if the kernel expects so

When resuming from s2ram, firmware may re-enable x2apic mode, which may have been disabled by the kernel during boot either because it doesn't support IRQ remapping or for other reasons. This causes the kernel to continue using the xapic interface, while the hardware is in x2apic mode, which causes hangs. This happens on defconfig + bare metal + s2ram.

Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be disabled, i.e. when x2apic_mode = 0.

The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the pre-sleep configuration or initial boot configuration for each CPU, including MSR state:

When executing from the power-on reset vector as a result of waking from an S2 or S3 sleep state, the platform firmware performs only the hardware initialization required to restore the system to either the state the platform was in prior to the initial operating system boot, or to the pre-sleep configuration state. In multiprocessor systems, non-boot processors should be placed in the same state as prior to the initial operating system boot.

(further ahead)

If this is an S2 or S3 wake, then the platform runtime firmware restores minimum context of the system before jumping to the waking vector. This includes:

CPU configuration. Platform runtime firmware restores the pre-sleep configuration or initial boot configuration of each CPU (MSR, MTRR, firmware update, SMBase, and so on). Interrupts must be disabled (for IA-32 processors, disabled by CLI instruction).

(and other things)

So at least as per the spec, re-enablement of x2apic by the firmware is allowed if "x2apic on" is a part of the initial boot configuration.

[1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization

[ bp: Massage. ]

Patch / fix

  • Linux Linux 5.10.253, 5.15.203, 6.1.167, 6.6.130, 6.12.78, 6.18.19, 6.19.9, 7.0
  • linux Debian 12 6.1.170-1
  • linux Debian 13 6.12.85-1
  • linux Debian 14 6.19.10-1

debian advisories DEBIAN-CVE-2026-43363

  • linux Ubuntu 22.04 LTS 5.15.0-186.196
  • linux Ubuntu 24.04 LTS 6.8.0-136.136
  • linux-aws Ubuntu 22.04 LTS 5.15.0-1112.119
  • linux-aws Ubuntu 24.04 LTS 6.8.0-1061.64
  • linux-gcp Ubuntu 22.04 LTS 5.15.0-1112.122
  • linux-gcp Ubuntu 24.04 LTS 6.8.0-1064.72
  • linux-gke Ubuntu 22.04 LTS 5.15.0-1108.114
  • linux-gke Ubuntu 24.04 LTS 6.8.0-1059.67

ubuntu advisories UBUNTU-CVE-2026-43363

Ubuntu security data © Canonical Ltd., from https://github.com/canonical/ubuntu-security-notices via OSV; changed: normalised to fixed package versions per release. CC BY-SA 4.0

  • kernel-64kb SLE Module for Basesystem 15 SP7 6.4.0-150700.53.81.1
  • kernel-syms SLE Module for Development Tools 15 SP7 6.4.0-150700.53.81.1
  • kernel-azure SLE Module for Public Cloud 15 SP7 6.4.0-150700.53.81.1
  • kernel-source SLE Module for Development Tools 15 SP7, SLE Module for Basesystem 15 SP7 6.4.0-150700.53.81.1
  • kernel-default SLE Workstation Extension 15 SP7, SLE Module for Legacy 15 SP7, SLE Module for Basesystem 15 SP7 +2 more 6.4.0-150700.53.81.1
  • kernel-zfcpdump SLE Module for Basesystem 15 SP7 6.4.0-150700.53.81.1
  • kernel-obs-build SLE Module for Development Tools 15 SP7 6.4.0-150700.53.81.1
  • kernel-default-base SLE Module for Basesystem 15 SP7 6.4.0-150700.53.81.1.150700.17.45.1

suse advisories SUSE-SU-2026:4254-1SUSE-SU-2026:23887-1SUSE-SU-2026:23902-1SUSE-SU-2026:23897-1SUSE-SU-2026:23881-1SUSE-SU-2026:4282-1

  • kernel-rt openSUSE Leap 16.0 6.12.0-160000.38.1
  • dtb-aarch64 openSUSE Leap 16.0 6.12.0-160000.38.1
  • kernel-64kb openSUSE Leap 16.0 6.12.0-160000.38.1
  • kernel-syms openSUSE Leap 16.0 6.12.0-160000.38.1
  • kernel-azure openSUSE Leap 16.0 6.12.0-160000.38.1
  • kernel-obs-qa openSUSE Leap 16.0 6.12.0-160000.38.1
  • kernel-source openSUSE Leap 16.0 6.12.0-160000.38.1
  • kernel-default openSUSE Leap 16.0 6.12.0-160000.38.1

opensuse advisories openSUSE-SU-2026:21910-1

Is CVE-2026-43363 in your stack? Fencer shows which of your repositories are affected as soon as an advisory lands, and opens the fix as a pull request.

Check with Fencer

Vendor advisories

What the vendors themselves say about their products: affected, fixed or not affected, and what to do.

red hat product security vex CVE-2026-43363 updated cvss 5.5

kernel: x86/apic: Disable x2apic on resume if the kernel expects so

  • Red Hat Enterprise Linux 6 perf, kernel, python-perf, kernel-kdump, kernel-firmware, kernel-bootwrapper, +1 more
    affected: workaround, no fix planned “Out of support scope”
  • Red Hat Enterprise Linux 7 perf, kernel, bpftool, kernel-rt, python-perf, kernel-kdump, +8 more Red Hat Enterprise Linux 8 perf, kernel, bpftool, kernel-rt, kernel-core, kernel-tools, +29 more Red Hat Enterprise Linux 9 rv, perf, rtla, kernel, bpftool, libperf, +83 more Red Hat Enterprise Linux 10 kernel
    affected: workaround, no fix available “Fix deferred”

Red Hat CSAF VEX © Red Hat, Inc., from https://security.access.redhat.com/data/csaf/v2/vex/; changed: reduced to product statuses and remediations. CC BY 4.0 · csaf

CISA SSVC

Exploitation
none
Automatable
no
Technical impact
partial
Assessed
3d ago

Exploit prediction

0.12% chance of exploitation in the next 30 days, higher than 2% of all scored CVEs (FIRST EPSS, 2026-11-09).

CVSS scores

assigned by version score vector
NVD 3.1 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Affected products

  • Linux Linux

Classification

Technology feeds

References

Sources

Fencer Intel keeps one entry per vulnerability: the CVE id wins, then GHSA, and records that alias each other are merged, except that two CVEs always keep separate entries. The same data is available as JSON.