Skip to content
Fencer Intel
high 7.8

CVE-2026-63827 json

apparmor: fix use-after-free in rawdata dedup loop

published 3mo ago modified 2mo ago also EUVD-2026-45493

cvss
7.8
version 3.1, CNA
cisa kev
Not listed
not in CISA's catalog
epss
0.1%
EPSS 0.1% chance of exploitation in 30 days, percentile 2%
public exploits
0
none known

Summary

In the Linux kernel, the following vulnerability has been resolved:

apparmor: fix use-after-free in rawdata dedup loop

aa_replace_profiles() walks ns->rawdata_list to dedup the incoming policy blob against entries already attached to existing profiles. Per the kernel-doc on struct aa_loaddata, list membership does not hold a reference: profiles hold pcount, and when the last pcount drops, do_ploaddata_rmfs() is queued on a workqueue that takes ns->lock and removes the entry. Between dropping the last pcount and the workqueue running, an entry remains on the list with pcount == 0.

aa_get_profile_loaddata() is an unconditional kref_get() on pcount, so when the dedup loop hits such an entry, refcount hardening reports

refcount_t: addition on 0; use-after-free.

inside aa_replace_profiles(), and the poisoned counter then trips "saturated" and "underflow" warnings on the subsequent uses of the same loaddata.

Before commit a0b7091c4de4 ("apparmor: fix race on rawdata dereference") the dedup path used a get_unless_zero-style helper on a single counter, so the existing "if (tmp)" guard was meaningful. The split-refcount refactor introduced aa_get_profile_loaddata(), which has plain kref_get() semantics, and the guard quietly became a no-op.

Introduce aa_get_profile_loaddata_not0(), matching the existing _not0 convention used by aa_get_profile_not0(), and use it for the rawdata_list dedup lookup so dying entries are skipped.

Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu 24.04 + stress-ng 0.17.06:

stress-ng --apparmor 1 --klog-check --timeout 60s

Without this patch the three refcount_t warnings fire within a few seconds. With it the same 60 s run is clean. Coverage is a smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN and CONFIG_PROVE_LOCKING would be welcome from anyone with the cycles.

Patch / fix

  • Linux Linux 5.10.261, 5.15.212, 6.1.177, 6.6.144, 6.12.95, 6.18.38, 6.20, 7.1.3, 7.2
  • linux Debian 12 6.1.177-1
  • linux Debian 13 6.12.95-1
  • linux Debian 14 7.1.3-1

debian advisories DEBIAN-CVE-2026-63827

  • linux Ubuntu 22.04 LTS 5.15.0-198.208
  • linux Ubuntu 24.04 LTS 6.8.0-147.147
  • linux Ubuntu 26.04 LTS 7.0.0-31.31
  • linux-aws Ubuntu 22.04 LTS 5.15.0-1117.124
  • linux-aws Ubuntu 24.04 LTS 6.8.0-1067.70
  • linux-aws Ubuntu 26.04 LTS 7.0.0-1012.12
  • linux-gcp Ubuntu 22.04 LTS 5.15.0-1118.128
  • linux-gcp Ubuntu 24.04 LTS 6.8.0-1071.79

ubuntu advisories UBUNTU-CVE-2026-63827

Ubuntu security data © Canonical Ltd., from https://github.com/canonical/ubuntu-security-notices via OSV; changed: normalised to fixed package versions per release. CC BY-SA 4.0

  • kernel-64kb SLES 15 SP5-LTSS, SLE High Performance Computing 15 SP5-LTSS, SLE High Performance Computing 15 SP5-ESPOS 5.14.21-150500.55.189.1
  • kernel-syms SLES for SAP 15 SP5, SLES 15 SP5-LTSS, SLE High Performance Computing 15 SP5-LTSS +1 more 5.14.21-150500.55.189.1
  • kernel-source SLES for SAP 15 SP5, SLES 15 SP5-LTSS, SLE Micro 5.5 +2 more 5.14.21-150500.55.189.1
  • kernel-default SLES for SAP 15 SP5, SLES 15 SP5-LTSS, SLE Micro 5.5 +3 more 5.14.21-150500.55.189.1
  • kernel-obs-build SLES for SAP 15 SP5, SLES 15 SP5-LTSS, SLE High Performance Computing 15 SP5-LTSS +1 more 5.14.21-150500.55.189.1
  • kernel-default-base SLES for SAP 15 SP5, SLES 15 SP5-LTSS, SLE Micro 5.5 +2 more 5.14.21-150500.55.189.1.150500.6.87.4
  • kernel-64kb SLE Module for Basesystem 15 SP7 6.4.0-150700.53.81.1
  • kernel-syms SLE Module for Development Tools 15 SP7 6.4.0-150700.53.81.1

suse advisories SUSE-SU-2026:4595-1SUSE-SU-2026:4254-1SUSE-SU-2026:4369-1SUSE-SU-2026:4347-1SUSE-SU-2026:4284-1SUSE-SU-2026:4279-1

  • kernel-rt openSUSE Leap 16.0 6.12.0-160000.37.1
  • dtb-aarch64 openSUSE Leap 16.0 6.12.0-160000.37.1
  • kernel-64kb openSUSE Leap 16.0 6.12.0-160000.37.1
  • kernel-syms openSUSE Leap 16.0 6.12.0-160000.37.1
  • kernel-azure openSUSE Leap 16.0 6.12.0-160000.37.1
  • kernel-obs-qa openSUSE Leap 16.0 6.12.0-160000.37.1
  • kernel-source openSUSE Leap 16.0 6.12.0-160000.37.1
  • kernel-default openSUSE Leap 16.0 6.12.0-160000.37.1

opensuse advisories openSUSE-SU-2026:21555-1openSUSE-SU-2026:11339-1

Is CVE-2026-63827 in your stack? Fencer shows which of your repositories are affected as soon as an advisory lands, and opens the fix as a pull request.

Check with Fencer

Vendor advisories

What the vendors themselves say about their products: affected, fixed or not affected, and what to do.

red hat product security vex CVE-2026-63827 updated

kernel: apparmor: fix use-after-free in rawdata dedup loop

  • Red Hat Enterprise Linux 6 perf, kernel, python-perf, kernel-kdump, kernel-firmware, kernel-bootwrapper, +1 more Red Hat Enterprise Linux 7 perf, kernel, bpftool, kernel-rt, python-perf, kernel-kdump, +8 more Red Hat Enterprise Linux 8 perf, kernel, bpftool, kernel-rt, kernel-core, kernel-tools, +29 more Red Hat Enterprise Linux 9 rv, perf, rtla, kernel, bpftool, libperf, +83 more Red Hat Enterprise Linux 10 kernel
    not affected: vulnerable code not present

Red Hat CSAF VEX © Red Hat, Inc., from https://security.access.redhat.com/data/csaf/v2/vex/; changed: reduced to product statuses and remediations. CC BY 4.0 · csaf

Exploit prediction

0.12% chance of exploitation in the next 30 days, higher than 2% of all scored CVEs (FIRST EPSS, 2026-11-11).

CVSS scores

assigned by version score vector
CNA 3.1 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Affected products

  • Linux Linux

Classification

Technology feeds

References

Sources

Fencer Intel keeps one entry per vulnerability: the CVE id wins, then GHSA, and records that alias each other are merged, except that two CVEs always keep separate entries. The same data is available as JSON.